Basic Info.
Installation
Sitting Type
Material
Enamel Steel Plate
Product Name
Enamel Water Tank
Keywords
Enamel Water Tank
Capacity
0.125 Cubic Meters to 5000 Cubic Meters
Panel Size
1m*1m/1m*0.5m/0.5m*0.5m
Transport Package
Plywood
Product Description
Product Description1. IntroductionHigh-strength enamel steel water tank is used as a substrate with HSC series enamel glazes and overglaze enamelling on δ2-δ5 steel plates assembled after firing a new water tank. Its resistance to mechanical impact strength of the ceramic layer is higher than that of the general strength of porcelain enamel ware 4-5 times daily, acid, alkali, no seepage, no leakage, corrosion of the tank is a new process. Performance indicators on their compliance with national industry standards, laws and regulations in line with our quality standards and food hygiene standards.
Our water heater production, increasing the use of enamel tanks. Enamel interior because of its superior performance in terms of corrosion, being replaced by other interior and became the main force of the water heater.
Water heater enamel tank capacity can be as small as 15 liters, 4000 liters and large, roughly divided into two kinds of European and American, the main difference is that the interior design.
2. Production processEnamel steel water tank made of high quality sheet metal, made into different sizes single plate (1m × lm, lm × 0.5m, 0.5m × 0.5m), and then assembled.
Under Q235 carbon steel plate shears material -> header Continued convex mold parts (parties) Drawing -> shears trimming four sides -> punch off the corners -> Second Add flanging forming mold parts -> Four-point Welding -> Piercing -> sand blasting -> enamel -> sintering -> overall assembled. Tensile strength Mpa | ≥70MPa |
Bending strength | ≥100 Mpa |
Barcol hardness | ≥60 |
Water absorption | ≤ 1.0% |
Fiber glass content | ≥25% |
Flexural Modulus of Elasticity | ≥ 5900MPa |
3. Main feature1. Enamel inside the tank clean, white appearance, to ensure that water is not contaminated;
2. Rugged, four plates reinforcing the connection plate and stainless steel reinforcement to enhance the assembled tank enamel strong and stable;
3. The combination plates assembled on site, convenient, fast, flexible and adaptable;
4. Impact, seismic performance, long service life;
5. Acid and alkali, corrosion resistance;
6. Does not leak, does not leak, good sealing performance;
7. The hot water storage tank is superior to other (heat tape required);
8. Enamel tank inside smooth, easy to clean.
4. Scope of applicationEnamel steel water tanks can be widely used in hotels, buildings, restaurants, research and teaching buildings, offices, agencies, military units, garden villas, residential quarters, entertainment venues and other public buildings, health care, food processing and other secondary water supply places. For the old building renovation or update the storage tank is very convenient.
5. InstallationFabricated steel tank base enamel may be concrete strip beam, or beam. Diagonal top of the tank with a breathable air filtration devices, device specifications and quantity determined by the manufacturer according to the size of imports. Use the stretch inside the water tank. Each nozzle flanges are standard flange 1.0MPa. Designers in the layout of the tank position, reference should GB17051-1997 secondary water supply facilities, sanitation norms. When the tank parameters or technical specifications and the actual position is not suitable for use by designers determined according to the actual need to make.
1, leaving the installation between the cabinet and the wall of not less than 800mm maintenance space, tank top, the bottom is not less than 500mm.
2, the first to do when the civil construction concrete stay, (stay required horizontal) side seams and around the bottom of the tank to be located between the standard block in the stay.
3, after assembly, turn off the outlet pipe and vent pipes, open into the water, turn on the water side edge inspection until the water tank filled, no leakage after 24 hours before the delivery party use.
Debugging
Enamel tank foundation can be concrete strip beam, or beam. Diagonal top of the tank with a breathable air filtration devices, specifications, quantity determined by the manufacturer of the device according to the size of imports. Inside the water tank are made of stretch. Each nozzle flanges are standard flange 1.0MPa. Designers arranged tank position, reference should GB17051-1997 secondary water supply facilities, sanitation norms.
Precautions
Inlet, outlet pipe and overflow pipe
1. The diameter of the tank, the position is determined by the design;
2. The water tank should be no less than four weeks 600mm channel bottom and top of the box less than 500mm;
3. Mount connecting the bottom and around the bottom of the gap between fast standard is intended to sit on the seat;
4. The injection test: Close the outlet pipe and vent pipes, open into the water, filled up, after 24 hours without water seepage qualified;
Tank full of water experiments, 24 hours without leakage;
Pipe joints, valves and related accessories for any leaks water phenomenon;
Observation of the water supply system functioning properly;
Check water disinfection system is working properly.6. Package7. FAQ1.Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China
2.Q: Can your factory customize the machine for clients ?
A: Yes, we can.
3.Q: What is your payment terms ?
A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.
4.Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
5.Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.
6.Q: Do you provide training how to assemble the water tank?
A: Yes, we can provide training at our factory or send engineer to provide training in your country.8. Related Products
Address:
Unit 25, 9th Floor, Building 7, Section 4 No. 188, West Road of South Fourth Ring Road, Fengtai District, Beijing, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000
Company Introduction:
Beijing Jijingyuan Environmental engineering Co., Ltd is a leading manufacturer and supplier for water treatment, FRP relative products and air conditioner. We serving both national and international markets. Our company has been providing quality products since established.
In our large product line we offer water treatment equipment and products. FRP/fiberglass/GRP products and machines(FRP pipe winding machine, FRP tank winding machine, FRP grating machine, FRP pultrusion machine. FRP pipe, FRP tank, FRP grating and all kinds of profiles), air conditioner ect. We procure quality raw material to make this assortment of products. Our products are also highly liked by our clients.
Our target is "excellent quality, honesty, innovation and shared interest. " Our products are popular in domestic and abroad because of high quality, high efficiency, reasonable price and honest, speedy and considerate service.